Need help with a specific project?Share your brief


Written by Amy on • min read •Community
Hyperlapse vs time lapse are two camera tricks that speed up time. By playing with time and motion, you can create cinematic looks for your videos. Plus, you can do this low budget with just about any digital camera and some simple editing software.
All you need is a tripod, a camera, and some patience. In this post, I’ll show you how to create these camera techniques, with tips to make them look better, and ideas on where to use them in your videos. Let’s start by clearly defining hyperlapse vs time lapse in video.

Rent equipment for photo shoots and filming on Scouty. Get in touch with our top lenders and book equipment in minutes.
Filmmakers often use these methods to show how time passes. In documentaries, you use these shots to establish the location. For example, a timelapse of a busy city skyline going from day to night. Hyperlapse can really add some energy, like tracking someone walking through the streets and capturing all the action around them.
A timelapse is a video created by snapping a bunch of photos at regular intervals over a long time. On the other hand, a hyperlapse adds movement by changing the camera’s position between shots. With timelapse, you usually keep the camera in one spot on a tripod, but with hyperlapse, you move it around for each picture
Hyperlapse vs Time Lapse –
The key to both techniques is the frame rate, which is how fast the video plays, measured in frames per second (fps). Most videos are usually shot at 25 or 30 fps. Movies often stick with 24 fps, giving them a more cinematic look, while 30 fps makes the video look sharper. If you want to speed up time in your video, you’ll need to record at a slower frame rate.
A lot of digital cameras, like the Canon EOS, have a built-in interval timer that can handle this for you. They also come with a timelapse movie mode that makes it easy to create clips ready for sharing right from the camera.
To set up a timelapse, just pop your camera on a tripod. If everything’s set up correctly, just hit record or snap a photo. For a still photography timelapse, you might only need a few seconds to capture it. But when you’re doing a timelapse video, the capturing can take as long as you want the final video to last.
To create a hyperlapse, you’ll need to move your camera between each shot, ideally using a video tripod for stability. Instead of letting the camera handle everything automatically, it’s better to take each frame manually so you can keep the timing and framing consistent.
First, figure out the path your camera will take and aim for at least 120 photos to get a nice, smooth sequence. Move your camera a little bit along that path and snap each frame yourself, keeping the intervals the same for every shot. How long you wait between shots really depends on what you’re filming. For example, it’s something fast, you’ll want shorter waits, while slower subjects might need a few minutes between shots.
It can be a bit of a hassle since you’ll need to pay attention to each shot, but taking your time to frame things just right will pay off in the final video. A hyperlapse can really give your footage some energy and a sense of movement.

Rent equipment for photo shoots and filming on Scouty. Get in touch with our top lenders and book equipment in minutes.
Whether your using hyperlapse vs time lapse both techniques require the same equipment. Using digital cameras instead of film has its advantages. It’s usually cheaper and gives better photos. An intervalometer, which is built into your camera or bought separately, takes photos at specific intervals. It’s great for time lapse and hyperlapse shots.
Make sure your camera’s battery is charged since you’ll be shooting for a while. It’s a good idea to bring an extra battery just in case. Also, check your SD card to ensure there’s enough space. You might need a bigger card or format the one you have after saving your files to make sure there’s enough room for your project.
Being prepared and having the right gear can make a big difference in the quality and ease of your work. Paying attention to these little things will help you get great, smooth shots, whether you’re capturing the stars or the hustle and bustle of a city market.
Editing a time lapse can change depending on how you filmed it. If you recorded over a long time at a regular frame rate, you’ll just need to speed up the clip in your editing software. But this can make the footage look shaky and won’t have that nice motion blur for moving things.
When you film a time lapse with the right settings, especially if your camera has a time lapse mode, you’ll get a bunch of still images instead of a video. You can then put those images together at whatever frame rate you want. Most popular editing programs, like Adobe Premiere, can handle this process just fine.